Engineering firm & structural advice

Structures for homeowners

Expertise in wall openings, extensions and major interior renovations. We safeguard the stability, strength and safety of your dream home.

Modern minimalist home extension with clean lines
view_timeline

Wall openings & stability

A common assignment is creating an opening in the rear façade with an extension built out from it. If this does not significantly affect stability, a beam can be placed above the opening.

If enough walls remain in the plane of the opening to carry the horizontal load down to the foundations properly, the opening does not significantly affect stability. If it does, a portal frame can provide sufficient stability.

verified_user Safety & strength

When steel is chosen, plasterboard around the beam or portal frame can provide the required fire resistance. Stresses and deflections must not exceed the required strength values for the beam and the frame. To carry the load above the opening before the beam and frame are installed, we use temporary props during construction.

forest

Extension systems

For extensions, Sterkteberekeningen often chooses timber-frame construction. It has the advantage of being light, and timber puts little CO2 (carbon dioxide) burden on the environment.

check_circle

Lightweight construction

check_circle

Environmentally friendly (low CO2 footprint)

check_circle

Concrete beam-and-block floor (prefab, poured, insulated)

Foundations

With foundations on sand, the new structure usually needs no extra piles.

Architectural interior background
Featured project

Major interior renovations

We also handle major interior renovations; see the project in Bosch en Duin.

location_on Vosselaan 13, Bosch en Duin
build_circle

Renovation & analysis

When cracks have become too large, we carry out a thorough analysis of their causes to solve the structural problems.

Common causes

  • foundation

    Poor foundations

    Settlement or subsidence of the subsoil.

  • fitness_center

    Load-bearing structure too light

    The structure is not designed for the current load.

  • thermostat

    Thermal stresses

    Excessive stresses caused by temperature differences.