News & insights

Blog

Stay up to date with our latest projects, structural tips and news on permits and regulations.

Structural advice Utrecht

Bathroom floor reinforcement, Bethlehemweg in Utrecht

calendar_today
person Structural engineer Siemelink

Professional advice and calculations from Sterkteberekeningen, your independent structural engineer in and around Utrecht.

During the bathroom renovation, the contractor noticed that the timber joists were deflecting too much and asked Sterkteberekeningen for advice. We found: timber joists that were too small, 70×150 mm, over a span of 4,500 mm with varying centre-to-centre spacings of up to 600 mm. In the middle of the edge joist on the hallway side, a notch of about 50 x 50 mm. This edge joist is also loaded by the trimmer joists of the staircase in the hallway. At the end of one joist, 2 vertical holes of 10 mm diameter, which can be a problem for the maximum shear force it can take. When these hidden defects became clear to the client, he considered holding the seller liable. But because the seller must then be given the chance to put the defects right, and it was doubtful whether the seller would do so quickly and well, the buyer asked Sterkteberekeningen whether there was a cheaper and faster solution. There was. Using the contractor’s rebar detector, we found a steel beam on the extension side that the previous owner had installed for the extension. From the thickness of the top flange we could tell it was an HEA200 section. With this section and an edge joist (on the hallway side) strengthened with a C160 section, we were able to create a load-bearing system with Lewis decking. With our certified software we calculated that the deflections and bending moments at mid-span of the joists meet the standard. The shear forces at the ends of the joists were also low enough to cope with the holes at the end of the timber joist. Afterwards the client was happy and e-mailed us on 11 March: “Many thanks again for the help and the flexibility at short notice.”

Need a structural calculation in Utrecht?

Planning a renovation, wall opening or extension and looking for an expert structural engineer in Utrecht? Sterkteberekeningen delivers fast, certified structural calculations in line with the Bouwbesluit (Dutch Building Decree). Get in touch today through our contact page for professional advice.